Ex-pump for application in
chemical and process technology
The micro annular gear pump mzr-6359X2 Ex of the hermetic inert pump series in its
explosion proof version is used for highly precise, low pulsation small volume dosage
even of aggressive and corrosive liquids. The compact design combined with high
achievable pressures are unique features. The pumps are applied in the field of chemical
and process technology. Thanks to the use of rotors and functional elements being made
of ceramics, a magnetic coupling, and case components made out of alloy C22, this pump
will take up any challenge in the chemical industry applications.
Advantages
- Ex-certification ATEX
conform with EU Directive 2014/34/EU
- Precision motor and sophisticated control
ATEX DC-servomotor with integrated
microcontroller
- Compact, chemically inert
length 354 mm, alloy C22, SSiC, Al2O3 and ZrO2
ceramics
- Hermetically sealed
magnetic coupling (NdFeB)
- High dosage precision
precision CV < 1 % at low volumes
- Low pulsation delivery, low shear stress
rotary micro annular gear technology,
no valves
Technical data
Flow rate
0.024 - 96 ml/min
Smallest dosage volume
15 µl
Displacement volume
24 µl
Differential pressure range
0 bar (73 psi), (40 bar (580 psi) *)
Maximum inlet pressure
80 bar (1160 psi) (inlet pressure + differential pressure)
Ambient temperature range
0 ... +40 (+32 ... +104 °F) °C
Liquid temperature range
-5 ... +60 °C (+23 ... +140 °F), -20 ... +120 °C * (-4 ... +248 °F)
Viscosity range
0.3 - 100 mPas
Precision CV
< 1 % (Coefficient of variation CV)
Ex-certification
CE Ex II 2G IIC c T4 X
Place of installation
Ex-area zone 1, 2
Fluid connection
1/8" NPT internal thread, lateral
Wetted parts
Pump case alloy C22 (DIN 2.4602), optional: stainless steel 316L; seals FFPM (Kalrez® Spectrum™ 6375), optional: FPM, EPDM; shaft/bearing sintered silicon carbide (SSiC); bearing and wetted functional parts Al2O3 ceramics; rotors partially stabilized ZrO2, optional: tungsten carbide Ni-based
Motor
BLDC motor with integrated motion controller, 24 V DC, 2 A, 53 W, analog hall sensors (3000 pulses / revolution)
Velocity range
1 - 4,000 rpm
Cable length
10 m
Weight
approx. 4,900 g
Remarks
* with optional heat insulation module; Customized solutions on request.
Notice
Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice.
This document is subject to change without notice.
Show more
Downloads
Back to list