Dosing pump for analytical instrumentation
The compact micro annular gear pump mzr-4622 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring low shear stress. It dispenses at a high precision the lowest volumes in microliter range. Due to its compact design small dimensions have been achieved. The pump is suitable for dosage of low viscosity liquids such as deionized water, watery solutions, methanol, solvents, oil and lubricants.
Advantages
- Compact dimensions
diameter 18 mm, length 88 mm - Small dosage volumes, high flow rates
smallest volume 2 µl – flow up to 72 ml/min - High dosage precision
precision CV 1 % at low volumes - Long service life
wear-resistant tungsten carbide - Low pulsation delivery, low shear stress
rotary micro annular gear technology
Applications
- Analytical instrumentation
- Fuel cells
- Laboratory automation
- In vitro diagnostics
Flow charts
Technical data
-
Flow rate
1.2 - 72 (min. 0.012*) ml/min -
Smallest dosage volume
2 µl -
Displacement volume
12 µl -
Differential pressure range
0 - 5 bar (73 psi) -
Maximum inlet pressure
1 bar (15 psi) -
Liquid temperature range
-20 ... +60 °C (-4 ... +140 °F) -
Viscosity range
0.3 – 100 (max. 1,000*) mPas -
Precision CV
1 % (Coefficient of variation CV) -
Velocity range
100 – 6,000 (min. 1*) rpm -
Fluid connection
slip fittings with outside diameter 2 mm optional: manifold assembly -
Wetted parts
stainless steel 316L, ceramics, tungsten carbide Ni based, epoxy resin, optional: alloy C22 (2.4602) instead of stainless steel, ceramics instead of tungsten carbide; shaft seal: graphite-reinforced PTFE, stainless steel 316L, optional: alloy C276 (2.4819) instead of stainless steel; static seals: FPM, optional: EPDM, FFPM -
Motor
DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet encoder 32 counts per turn -
Electrical connection
10-pole connector -
Dimensions (L x W x H)
Ø 18 mm, length 88 mm -
Weight
approx. 100 g -
Remarks
* depending on accessories, Customized solutions on request Notice
Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice.
This document is subject to change without notice.
Show more Downloads
Back to list