The terminal box S-G05 is easy to handle and at the same time versatile applicable accessory for micro annular gear pumps. The terminal box allows control of the pump with a potentiometer. As an alternative the pump can be remotely controlled with an external analog voltage signal 0–10 V, an external current signal (0–20 mA or 4–20 mA) or with a RS-232 interface. To set all operating parameters including calibration, ramp, step, speed, dispense/pause times and flow direction an adapted software with a serial interface RS-232 is delivered. The CE-conform installation includes an EMC module. The terminal box and micro annular gear pump can be provided optionally with an external 24 V DC power supply.
- For connection of micro annular gear pumps
mzr-2505/2905/4605/7205, mzr-7245, mzr-6355/7255, mzr-2965/4665/7265
- Compact plastic case
- Easy handling
potentiometer, standard connectors
- Standard interface
0-10 V, 0(4)-20 mA
- Serial interface RS-232
- Two-colored LED status indicator
- 24 V power supply over screw terminal or DIN socket
- Integrated EMC module
Supply voltage24 V DC (12 – 28 V)
Voltageplug terminal, 8-pole and DIN 45323 socket
Pump connectorplug connector, 8-pole
Serial interfaceRS-232, SUB-D plug, 9-pole
Speed value-input »Analog Extern«internal potentiometer 10 kΩ; voltage signal 0 – 10 V; current signal 0 – 20 mA or 4 – 20 mA
Status LEDReady: green; fault: red
Output »Fault Out«Open collector max. UB / 30 mA; no error: connected to GND; as input: low 0...0.5 V / high 4 V...UB
Protection classIP 20
Operating temperature range0 … +50 °C (+32 … +122 °F)
Dimensions (L x W x H)approx. 100 x 92 x 35 mm
Weightapprox. 125 g
RemarksSubject to technical changes.
Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice.
This document is subject to change without notice.
- mzr-Pump Controller version 3.0.3 FR DE EN 948.50 KB
- Faulhaber Motion Manager version 5.4.0 FR DE EN 12.97 MB