smartDoS® is a flexible dosing and filling system that is configured according to customer requirements. On the one hand smartDoS® is suitable for the ergonomic design of manual workstations for small and pilot series. On the other hand, production processes can be automated due to the integrability of mechanics and control technology.

Advantages

  • Dosing volumes in the microliter and milliliter range
  • Adjustable dosing dynamic
  • Wide viscosity range
  • Self-priming micro pump
  • Graphical user interface
  • Signal exchange with PLC
  • Gentle, bubble-free dosage
  • No liquid quality loss
  • Effective use of raw materials
  • Cost and time savings
  • Easy emptying, rinsing and adaption

Applications

  • Dosing in cosmetics
  • Filling in the pharmaceutical sector
  • Dosing of ink and colorants
  • Bubble-free filling of oil dampers

    System components

    • Micro annular gear pump
    • Smart, intuitive control with
    • mzr-Touch Control
    • Filters, different sizes and mesh width
    • Reservoir
    • Shut-off valve
    • Dosing needle
    • Hand or foot switch

    Typical liquids

    • Oils, greases, silicones, waxes
    • Adhesives, UV-adhesives, colorants
    • Solvents
    • Additives in process engineering, pharma and food industry

    Technical data

    • Pumps
      Micro annular gear pumps of the Low pressure and High performance pump series, of the Hermetic inert, Magnetic hermetic and Modular pump series
    • Flow rate
      0.0015 – 288 * ml/min
    • Differential pressure range
      0 – 40 bar *
    • Liquid temperature range
      -20 … +150 °C (-4 ... 302 °F) *
    • Maximum inlet pressure
      1 – 10 bar *
    • Viscosity range
      0.3 – 50,000 (1,000,000) * mPas
    • Precision CV
      < 1 % (Coefficient of variation CV)
    • Fluid connection
      1/8" NPT, 1/4"-28 UNF
    • Wetted parts
      stainless steel 1.4404/1.4435 (316L), tungsten carbide Ni based; shaft seal: graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM
    • Controller
      mzr-Touch Control with 4,3"-Touch Display and graphical user interface
    • Power supply
      24 V DC / 3 A (5 A *)
    • Interface
      0 – 10 V, socket 6-pole according to DIN 45321
    • Digital outputs
      Open Collector, 24 V, 0.5 A
    • Remarks
      * Options depending on the chosen configuration. Customized solution on request.
    • Notice
      Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice. 

    Show more

    Downloads

     Back to list