smartDoS - Dosing system for cosmetics and mechanical engineering

smartDoS® is the flexible dosing and filling system for industrial production. On the one hand, smartDoS is suitable for the ergonomic design of manual workstations for small batches and pilot series. An optional hand switch or foot switch easily provides a start-stop function.

On the other hand, the dosing system can be integrated mechanically and in terms of control technology. It is suitable for automated production processes in liquid filling.

Advantages

  • Dosing volumes in the microliter and milliliter range
  • Adjustable dosing dynamic
  • Wide viscosity range
  • Self-priming micro pump
  • Graphical user interface
  • Signal exchange with PLC
  • Gentle, bubble-free dosage
  • No liquid quality loss
  • Effective use of raw materials
  • Cost and time savings
  • Easy emptying, rinsing and adaption

Applications

  • Dosing in cosmetics
  • Filling in the pharmaceutical sector
  • Ink and color dosing
  • Bubble-free filling of oil dampers
  • Microencapsulation

Typical liquids

  • Oils, greases, silicones, waxes
  • Adhesives, coatings
  • Colorants, flavors
  • Gels, pastes, emulsions
  • Additives in Food and Pharma

Components

  • Micro annular gear pump
  • Filter
  • Reservoir
  • mzr-Touch Control
  • Hand or foot switch
  • Shut-off element
  • Dosing needle

Please accept marketing-cookies to watch this video.

Technical data

  • Pumps
    Micro annular gear pumps of the Low pressure and High performance pump series, of the Hermetic inert, Magnetic hermetic and Modular pump series
  • Flow rate
    0.0015 – 288 * ml/min
  • Differential pressure range
    0 – 40 bar *
  • Liquid temperature range
    -20 … +150 °C (-4 ... 302 °F) *
  • Maximum inlet pressure
    1 – 10 bar *
  • Viscosity range
    0.3 – 50,000 (1,000,000) * mPas
  • Precision CV
    < 1 % (Coefficient of variation CV)
  • Fluid connection
    1/8" NPT, 1/4"-28 UNF
  • Wetted parts
    stainless steel 1.4404/1.4435 (316L), tungsten carbide Ni based; shaft seal: graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM
  • Controller
    mzr-Touch Control with 4,3"-Touch Display and graphical user interface
  • Power supply
    24 V DC / 3 A (5 A *)
  • Interface
    0 – 10 V, socket 6-pole according to DIN 45321
  • Digital outputs
    Open Collector, 24 V, 0.5 A
  • Remarks
    * Options depending on the chosen configuration. Customized solution on request.
  • Notice
    Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice. 
    This document is subject to change without notice.

Show more

Downloads

 Back to list